[ad_1]
Wake Chapel Church, a house of worship with two locations in the greater Raleigh, North Carolina, area is leveraging Blaze Audio loudspeaker equipment for the AV needs at its Tarheel Club Road location, according to a case study provided to this publication.
Wake Chapel Church, a house of worship with two locations in the greater Raleigh, North Carolina, area is leveraging Blaze Audio loudspeaker equipment for the AV needs at its Tarheel Club Road location, according to a case study provided to this publication.
The 3,000 seat building installed a CCA10i loudspeaker system from the Constant Curvature Array (a.k.a. CCA) loudspeaker family by Blaze Audio for music and speech.
The church partnered with Hi Tech Electronics Inc., a Greenville, North Carolina-based designer and integrator with a specialty in education and house of worship venues, for the installation.
“The sanctuary at Wake Chapel is a large space that measures 187 feet wide with a room depth of 137 feet from the front of the stage to the rear wall,” David Williams, president at Hi Tech Electronics Inc., said in the case study. “To properly address a congregation of roughly 3,000 people in a space this wide and deep, we needed loudspeakers capable of delivering wide horizontal dispersion in addition to significant throw. Equally important, we wanted to maintain a clear line of sight to the stage area from the entire seating area. We were initially expecting to fly as many as 36 line array enclosures deployed in three hangs of 12—left / center / right—across the front of the stage area, but this would have impaired visibility, so we sought another solution. We found it with the CCA10i Constant Curvature Array series loudspeakers from Blaze Audio.”
The project also involved re-using four pre-existing WorxAudio TL 218SSi-P subwoofers, along with 12 Blaze Audio PowerZone Connect 3004 Class-D power amplifiers. Mount Holly, North Carolina-based Selah Media Productions provided system control solutions, including a Symetrix Prism 16×16 for the main array and a Symetrix Prism 8×8 for the delay loudspeaker system. A custom DSP platform was programmed with Symetrix Composer software.
“Everyone — both church personnel and congregation members — has been very impressed with the new Blaze Audio setup,” Steven Petersen, lead audio engineer at Wake Chapel, said in the release. “The system’s speech intelligibility is better than it’s ever been, and this is crucial, as it enables people to gain the most out of what’s being said. Likewise, music reproduction is terrific. Music sounds more natural and has more presence than we’ve ever had. Equally important, the system doesn’t visually distract from what’s taking place on stage — and that enables everyone to be more engaged. David and his crew did an excellent job, and we couldn’t be happier.”
[ad_2]
Source link
